The effect of flux types on the formation of green light emitting phosphor particles with spherical shape and filled morphology

S. K. Hong, D. S. Jung, S. H. Ju, H. Y. Koo, Y. C. Kang

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

(CeTb)MgAl11O19 (CTMA) phosphor particles were prepared by high-temperature spray pyrolysis from spray solutions with various types of flux materials. The particles prepared from spray solutions with ammonium dihydrogen phosphate and lithium carbonate fluxes had spherical shape and filled morphology at temperatures of 900°C and 1650°C. On the other hand, the particles prepared from spray solutions without flux material had hollow and fractured morphology at temperatures of 900°C and 1650°C. The melting of flux material formed the spherical intermediate particles with filled morphology. These spherical intermediate particles were formed from spray solutions with flux material that transformed into spherical CTMA phosphor particles with filled morphology at a high-preparation temperature. The phosphor particles prepared by spray pyrolysis from the spray solution with appropriate flux materials at 1650°C had high photoluminescence intensities, spherical shape, and filled morphology.

Original languageEnglish
Pages (from-to)341-346
Number of pages6
JournalJournal of Materials Science: Materials in Electronics
Volume17
Issue number5
DOIs
Publication statusPublished - 2006 May
Externally publishedYes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'The effect of flux types on the formation of green light emitting phosphor particles with spherical shape and filled morphology'. Together they form a unique fingerprint.

  • Cite this