The effect of preparation conditions on the properties of Li 3V 2(PO 4) 3 cathode powders prepared by ultrasonic spray pyrolysis

You Na Ko, Jung Hyun Kim, Young Jun Hong, Yun Chan Kang

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Li 3V 2(PO 4) 3 powders were prepared by spray pyrolysis under various conditions of gas atmosphere, preparation temperature, and carrier gas flow rate. The precursor powders had a submicrometre size and spherical shape irrespective of their preparation conditions. The morphologies and crystal structures of subsequently post-treated powders varied with the preparation conditions: 1300 °C with a flow rate of 20 L minute under 10% H 2/N 2 reducing gas produced spherical, pure Li 3V 2(PO 4) 3particles. Li 3V 2(PO 4) 3powder prepared under the optimum conditions showed a maximum initial discharge capacity of 144 mAhg 1.

Original languageEnglish
Pages (from-to)252-257
Number of pages6
JournalJournal of Ceramic Processing Research
Volume13
Issue number3
Publication statusPublished - 2012 Jul 19
Externally publishedYes

Fingerprint

Spray pyrolysis
Powders
Cathodes
Ultrasonics
Gases
Flow rate
Flow of gases
Crystal structure
PO-2
Temperature

Keywords

  • Cathode material
  • Lithium vanadium phosphate
  • Spray pyrolysis

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

The effect of preparation conditions on the properties of Li 3V 2(PO 4) 3 cathode powders prepared by ultrasonic spray pyrolysis. / Ko, You Na; Kim, Jung Hyun; Hong, Young Jun; Kang, Yun Chan.

In: Journal of Ceramic Processing Research, Vol. 13, No. 3, 19.07.2012, p. 252-257.

Research output: Contribution to journalArticle

@article{f19e03363bec4a98a722591573769c1e,
title = "The effect of preparation conditions on the properties of Li 3V 2(PO 4) 3 cathode powders prepared by ultrasonic spray pyrolysis",
abstract = "Li 3V 2(PO 4) 3 powders were prepared by spray pyrolysis under various conditions of gas atmosphere, preparation temperature, and carrier gas flow rate. The precursor powders had a submicrometre size and spherical shape irrespective of their preparation conditions. The morphologies and crystal structures of subsequently post-treated powders varied with the preparation conditions: 1300 °C with a flow rate of 20 L minute under 10{\%} H 2/N 2 reducing gas produced spherical, pure Li 3V 2(PO 4) 3particles. Li 3V 2(PO 4) 3powder prepared under the optimum conditions showed a maximum initial discharge capacity of 144 mAhg 1.",
keywords = "Cathode material, Lithium vanadium phosphate, Spray pyrolysis",
author = "Ko, {You Na} and Kim, {Jung Hyun} and Hong, {Young Jun} and Kang, {Yun Chan}",
year = "2012",
month = "7",
day = "19",
language = "English",
volume = "13",
pages = "252--257",
journal = "Journal of Ceramic Processing Research",
issn = "1229-9162",
publisher = "Hanyang University",
number = "3",

}

TY - JOUR

T1 - The effect of preparation conditions on the properties of Li 3V 2(PO 4) 3 cathode powders prepared by ultrasonic spray pyrolysis

AU - Ko, You Na

AU - Kim, Jung Hyun

AU - Hong, Young Jun

AU - Kang, Yun Chan

PY - 2012/7/19

Y1 - 2012/7/19

N2 - Li 3V 2(PO 4) 3 powders were prepared by spray pyrolysis under various conditions of gas atmosphere, preparation temperature, and carrier gas flow rate. The precursor powders had a submicrometre size and spherical shape irrespective of their preparation conditions. The morphologies and crystal structures of subsequently post-treated powders varied with the preparation conditions: 1300 °C with a flow rate of 20 L minute under 10% H 2/N 2 reducing gas produced spherical, pure Li 3V 2(PO 4) 3particles. Li 3V 2(PO 4) 3powder prepared under the optimum conditions showed a maximum initial discharge capacity of 144 mAhg 1.

AB - Li 3V 2(PO 4) 3 powders were prepared by spray pyrolysis under various conditions of gas atmosphere, preparation temperature, and carrier gas flow rate. The precursor powders had a submicrometre size and spherical shape irrespective of their preparation conditions. The morphologies and crystal structures of subsequently post-treated powders varied with the preparation conditions: 1300 °C with a flow rate of 20 L minute under 10% H 2/N 2 reducing gas produced spherical, pure Li 3V 2(PO 4) 3particles. Li 3V 2(PO 4) 3powder prepared under the optimum conditions showed a maximum initial discharge capacity of 144 mAhg 1.

KW - Cathode material

KW - Lithium vanadium phosphate

KW - Spray pyrolysis

UR - http://www.scopus.com/inward/record.url?scp=84863850763&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863850763&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84863850763

VL - 13

SP - 252

EP - 257

JO - Journal of Ceramic Processing Research

JF - Journal of Ceramic Processing Research

SN - 1229-9162

IS - 3

ER -