The synthesis and the pressureless sintering of Bi2Te3 for thermoelectric application

Chang Hyun Lee, Ye Won Shin, Hyo Soon Shin, Dong Hun Yeo, Sahn Nahm

Research output: Contribution to journalArticle

Abstract

Recently, interest in thermoelectric generation and cooling has increased; thus, placing greater emphasis on the thermoelectric material properties as well as on the manufacturing process. Bi2Te3 is a material that exhibits outstanding thermoelectric properties at room temperature, but it is manufactured in the form of monocrystalline ingots, which makes it difficult to process the material, and it is associated with significant material losses. In order to overcome this disadvantage, the pressureless sintering process has been investigated, but densification is difficult, and mainly the HIP and SPS methods are currently being studied. However, there is a lack of research on pressureless sintering without an additional driving force such as pressure or electric current application. In this study, a regular sintering furnace was modified to combine rapid sintering and ambient sintering in order to obtain dense Bi2Te3 pellets. First, Bi2Te3 powder was synthesized mechanochemically and a wet-milling process was established so that densification can occur easily during the sintering process. Using the synthesized powder, dense Bi2Te3 pellets were obtained after 10 min sintering at 520 °C after rapid heating at a rate of 120 °C/sec in a H2 and Te atmosphere. During the rapid sintering process, abnormalities were not produced from the oxidation reaction, and by preventing Te volatilization using Te atmosphere powder, no peculiar phenomena related to Te volatilization were observed in the pellets. Through this study, the feasibility of mass production of Bi2Te3 by the pressureless sintering process was investigated using rapid and ambient sintering.

Original languageEnglish
Pages (from-to)40-44
Number of pages5
JournalNanoscience and Nanotechnology Letters
Volume9
Issue number1
DOIs
Publication statusPublished - 2017 Jan 1

Fingerprint

Sintering
Powders
Vaporization
Densification
Hot isostatic pressing
Electric currents
Ingots
Materials properties
Furnaces
Cooling
Heating
Oxidation

Keywords

  • BiTe
  • Pressureless sintering
  • Thermoelectric
  • Thick film process

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

The synthesis and the pressureless sintering of Bi2Te3 for thermoelectric application. / Lee, Chang Hyun; Shin, Ye Won; Shin, Hyo Soon; Yeo, Dong Hun; Nahm, Sahn.

In: Nanoscience and Nanotechnology Letters, Vol. 9, No. 1, 01.01.2017, p. 40-44.

Research output: Contribution to journalArticle

Lee, Chang Hyun ; Shin, Ye Won ; Shin, Hyo Soon ; Yeo, Dong Hun ; Nahm, Sahn. / The synthesis and the pressureless sintering of Bi2Te3 for thermoelectric application. In: Nanoscience and Nanotechnology Letters. 2017 ; Vol. 9, No. 1. pp. 40-44.
@article{d8b157b402ce4299b3abc33fc886242a,
title = "The synthesis and the pressureless sintering of Bi2Te3 for thermoelectric application",
abstract = "Recently, interest in thermoelectric generation and cooling has increased; thus, placing greater emphasis on the thermoelectric material properties as well as on the manufacturing process. Bi2Te3 is a material that exhibits outstanding thermoelectric properties at room temperature, but it is manufactured in the form of monocrystalline ingots, which makes it difficult to process the material, and it is associated with significant material losses. In order to overcome this disadvantage, the pressureless sintering process has been investigated, but densification is difficult, and mainly the HIP and SPS methods are currently being studied. However, there is a lack of research on pressureless sintering without an additional driving force such as pressure or electric current application. In this study, a regular sintering furnace was modified to combine rapid sintering and ambient sintering in order to obtain dense Bi2Te3 pellets. First, Bi2Te3 powder was synthesized mechanochemically and a wet-milling process was established so that densification can occur easily during the sintering process. Using the synthesized powder, dense Bi2Te3 pellets were obtained after 10 min sintering at 520 °C after rapid heating at a rate of 120 °C/sec in a H2 and Te atmosphere. During the rapid sintering process, abnormalities were not produced from the oxidation reaction, and by preventing Te volatilization using Te atmosphere powder, no peculiar phenomena related to Te volatilization were observed in the pellets. Through this study, the feasibility of mass production of Bi2Te3 by the pressureless sintering process was investigated using rapid and ambient sintering.",
keywords = "BiTe, Pressureless sintering, Thermoelectric, Thick film process",
author = "Lee, {Chang Hyun} and Shin, {Ye Won} and Shin, {Hyo Soon} and Yeo, {Dong Hun} and Sahn Nahm",
year = "2017",
month = "1",
day = "1",
doi = "10.1166/nnl.2017.2300",
language = "English",
volume = "9",
pages = "40--44",
journal = "Nanoscience and Nanotechnology Letters",
issn = "1941-4900",
publisher = "American Scientific Publishers",
number = "1",

}

TY - JOUR

T1 - The synthesis and the pressureless sintering of Bi2Te3 for thermoelectric application

AU - Lee, Chang Hyun

AU - Shin, Ye Won

AU - Shin, Hyo Soon

AU - Yeo, Dong Hun

AU - Nahm, Sahn

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Recently, interest in thermoelectric generation and cooling has increased; thus, placing greater emphasis on the thermoelectric material properties as well as on the manufacturing process. Bi2Te3 is a material that exhibits outstanding thermoelectric properties at room temperature, but it is manufactured in the form of monocrystalline ingots, which makes it difficult to process the material, and it is associated with significant material losses. In order to overcome this disadvantage, the pressureless sintering process has been investigated, but densification is difficult, and mainly the HIP and SPS methods are currently being studied. However, there is a lack of research on pressureless sintering without an additional driving force such as pressure or electric current application. In this study, a regular sintering furnace was modified to combine rapid sintering and ambient sintering in order to obtain dense Bi2Te3 pellets. First, Bi2Te3 powder was synthesized mechanochemically and a wet-milling process was established so that densification can occur easily during the sintering process. Using the synthesized powder, dense Bi2Te3 pellets were obtained after 10 min sintering at 520 °C after rapid heating at a rate of 120 °C/sec in a H2 and Te atmosphere. During the rapid sintering process, abnormalities were not produced from the oxidation reaction, and by preventing Te volatilization using Te atmosphere powder, no peculiar phenomena related to Te volatilization were observed in the pellets. Through this study, the feasibility of mass production of Bi2Te3 by the pressureless sintering process was investigated using rapid and ambient sintering.

AB - Recently, interest in thermoelectric generation and cooling has increased; thus, placing greater emphasis on the thermoelectric material properties as well as on the manufacturing process. Bi2Te3 is a material that exhibits outstanding thermoelectric properties at room temperature, but it is manufactured in the form of monocrystalline ingots, which makes it difficult to process the material, and it is associated with significant material losses. In order to overcome this disadvantage, the pressureless sintering process has been investigated, but densification is difficult, and mainly the HIP and SPS methods are currently being studied. However, there is a lack of research on pressureless sintering without an additional driving force such as pressure or electric current application. In this study, a regular sintering furnace was modified to combine rapid sintering and ambient sintering in order to obtain dense Bi2Te3 pellets. First, Bi2Te3 powder was synthesized mechanochemically and a wet-milling process was established so that densification can occur easily during the sintering process. Using the synthesized powder, dense Bi2Te3 pellets were obtained after 10 min sintering at 520 °C after rapid heating at a rate of 120 °C/sec in a H2 and Te atmosphere. During the rapid sintering process, abnormalities were not produced from the oxidation reaction, and by preventing Te volatilization using Te atmosphere powder, no peculiar phenomena related to Te volatilization were observed in the pellets. Through this study, the feasibility of mass production of Bi2Te3 by the pressureless sintering process was investigated using rapid and ambient sintering.

KW - BiTe

KW - Pressureless sintering

KW - Thermoelectric

KW - Thick film process

UR - http://www.scopus.com/inward/record.url?scp=85013807605&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85013807605&partnerID=8YFLogxK

U2 - 10.1166/nnl.2017.2300

DO - 10.1166/nnl.2017.2300

M3 - Article

VL - 9

SP - 40

EP - 44

JO - Nanoscience and Nanotechnology Letters

JF - Nanoscience and Nanotechnology Letters

SN - 1941-4900

IS - 1

ER -