Thermal Properties of Melt-Blended Poly(ether ether ketone) and Poly(ether imide)

Yong Sung Chun, Heon Sang Lee, Hyun Chul Jung, Woo Nyon Kim

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single glass transition temperature (Tg) and negative excess heat capacities of mixing were observed with the blend composition. These results indicate that there is a favorable interaction between the PEEK and PEI in the blends and that there is miscibility between the two components. From the Lu and Weiss equation and a modified equation from this work, the polymerpolymer interaction parameter (X12) of the amorphous PEEK-PEI blends was calculated and found to range from -0.058 to -0.196 for the extruded blends with the compositions. The X12 values calculated from this work appear to be lower than the X12 values calculated from the Lu and Weiss equation. The X12 values calculated from the Tg method both ways decreased with increase of the PEI weight fraction.

Original languageEnglish
Pages (from-to)733-739
Number of pages7
JournalJournal of Applied Polymer Science
Volume72
Issue number6
Publication statusPublished - 1999 May 9

Fingerprint

Imides
Polyether ether ketones
Ether
Ethers
Thermodynamic properties
Liquid nitrogen
Chemical analysis
Thermoanalysis
Specific heat
Extrusion
Differential scanning calorimetry
Quenching
Solubility
polyetheretherketone

Keywords

  • Blend
  • Glass transition temperature
  • Poly(ether ether ketone)
  • Poly(ether imide)
  • Polymer-polymer interaction parameter

ASJC Scopus subject areas

  • Polymers and Plastics

Cite this

Thermal Properties of Melt-Blended Poly(ether ether ketone) and Poly(ether imide). / Chun, Yong Sung; Lee, Heon Sang; Jung, Hyun Chul; Kim, Woo Nyon.

In: Journal of Applied Polymer Science, Vol. 72, No. 6, 09.05.1999, p. 733-739.

Research output: Contribution to journalArticle

Chun, Yong Sung ; Lee, Heon Sang ; Jung, Hyun Chul ; Kim, Woo Nyon. / Thermal Properties of Melt-Blended Poly(ether ether ketone) and Poly(ether imide). In: Journal of Applied Polymer Science. 1999 ; Vol. 72, No. 6. pp. 733-739.
@article{78c550846568492b841eee4fe6a6b3d5,
title = "Thermal Properties of Melt-Blended Poly(ether ether ketone) and Poly(ether imide)",
abstract = "The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single glass transition temperature (Tg) and negative excess heat capacities of mixing were observed with the blend composition. These results indicate that there is a favorable interaction between the PEEK and PEI in the blends and that there is miscibility between the two components. From the Lu and Weiss equation and a modified equation from this work, the polymerpolymer interaction parameter (X12) of the amorphous PEEK-PEI blends was calculated and found to range from -0.058 to -0.196 for the extruded blends with the compositions. The X12 values calculated from this work appear to be lower than the X12 values calculated from the Lu and Weiss equation. The X12 values calculated from the Tg method both ways decreased with increase of the PEI weight fraction.",
keywords = "Blend, Glass transition temperature, Poly(ether ether ketone), Poly(ether imide), Polymer-polymer interaction parameter",
author = "Chun, {Yong Sung} and Lee, {Heon Sang} and Jung, {Hyun Chul} and Kim, {Woo Nyon}",
year = "1999",
month = "5",
day = "9",
language = "English",
volume = "72",
pages = "733--739",
journal = "Journal of Applied Polymer Science",
issn = "0021-8995",
publisher = "John Wiley and Sons Inc.",
number = "6",

}

TY - JOUR

T1 - Thermal Properties of Melt-Blended Poly(ether ether ketone) and Poly(ether imide)

AU - Chun, Yong Sung

AU - Lee, Heon Sang

AU - Jung, Hyun Chul

AU - Kim, Woo Nyon

PY - 1999/5/9

Y1 - 1999/5/9

N2 - The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single glass transition temperature (Tg) and negative excess heat capacities of mixing were observed with the blend composition. These results indicate that there is a favorable interaction between the PEEK and PEI in the blends and that there is miscibility between the two components. From the Lu and Weiss equation and a modified equation from this work, the polymerpolymer interaction parameter (X12) of the amorphous PEEK-PEI blends was calculated and found to range from -0.058 to -0.196 for the extruded blends with the compositions. The X12 values calculated from this work appear to be lower than the X12 values calculated from the Lu and Weiss equation. The X12 values calculated from the Tg method both ways decreased with increase of the PEI weight fraction.

AB - The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single glass transition temperature (Tg) and negative excess heat capacities of mixing were observed with the blend composition. These results indicate that there is a favorable interaction between the PEEK and PEI in the blends and that there is miscibility between the two components. From the Lu and Weiss equation and a modified equation from this work, the polymerpolymer interaction parameter (X12) of the amorphous PEEK-PEI blends was calculated and found to range from -0.058 to -0.196 for the extruded blends with the compositions. The X12 values calculated from this work appear to be lower than the X12 values calculated from the Lu and Weiss equation. The X12 values calculated from the Tg method both ways decreased with increase of the PEI weight fraction.

KW - Blend

KW - Glass transition temperature

KW - Poly(ether ether ketone)

KW - Poly(ether imide)

KW - Polymer-polymer interaction parameter

UR - http://www.scopus.com/inward/record.url?scp=0033538155&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033538155&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0033538155

VL - 72

SP - 733

EP - 739

JO - Journal of Applied Polymer Science

JF - Journal of Applied Polymer Science

SN - 0021-8995

IS - 6

ER -