Thin and hermetic packaging process for flat panel display application

Young Cho Kim, Jin Wook Jeong, Duck Jung Lee, Won Do Choi, Sang Geun Lee, Byeong Kwon Ju

Research output: Contribution to journalArticle

Abstract

This paper presents a study on the tubeless Plasma Display Panel (PDP) packaging using glass-to-glass electrostatic bonding with intermediate amorphous silicon. The bonded sample sealing the mixed gas with three species showed high strength ranging from 2.5 MPa to 4 MPa. The glass-to-glass bonding for packaging was performed at a low temperature of 180 °C by applying bias of 250 V in ambient of mixed gases of He-Ne(27 %)-Xe(3 %). The tubeless packaging was accomplished by bonding the support glass plate of 30 mm×50 mm on the rear glass panel and the capping glass of 20 mm×20 mm. The 4-inch color AC-PDP with thickness of 8 mm was successfully fabricated and fully emitted as white color at a firing voltage of 190V.

Original languageEnglish
Pages (from-to)11-16
Number of pages6
JournalJournal of Information Display
Volume3
Issue number1
DOIs
Publication statusPublished - 2002
Externally publishedYes

    Fingerprint

Keywords

  • Electrostatic bonding
  • Hermetic seal
  • Light emission
  • PDP
  • Tubeless packaging

ASJC Scopus subject areas

  • Materials Science(all)
  • Electrical and Electronic Engineering

Cite this