Three-Ply Al/Mg/Al Clad Sheets Fabricated by Twin-Roll Casting and Post-treatments (Homogenization, Warm Rolling, and Annealing)

Jaeyeong Park, Hyejin Song, Jung Su Kim, Seok S Sohn, Sunghak Lee

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

When thin Al alloy sheets are clad on to twin-roll-cast Mg alloy melt, inherent drawbacks of Mg alloys such as poor formability, corrosion resistance, and surface quality can be effectively complemented. In this study, three-ply Al/Mg/Al clad sheets were fabricated by twin-roll casting and post-treatments. Brittle interfacial layers composed of γ (Mg17Al12) and β (Mg2Al3) phases were inevitably formed, but their proper thickening during the post-treatments led to improvement of interfacial bonding and resultant tensile properties. In particular, warm rolling was an effective way to modify interfacial microstructures and tensile properties by minimizing deformation inhomogeneity and stress concentration.

Original languageEnglish
Pages (from-to)57-62
Number of pages6
JournalMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Volume48
Issue number1
DOIs
Publication statusPublished - 2017 Jan 1
Externally publishedYes

Fingerprint

tensile properties
homogenizing
Casting
Annealing
Tensile properties
annealing
cast alloys
stress concentration
corrosion resistance
inhomogeneity
Formability
microstructure
Surface properties
Corrosion resistance
Stress concentration
Microstructure

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys

Cite this

Three-Ply Al/Mg/Al Clad Sheets Fabricated by Twin-Roll Casting and Post-treatments (Homogenization, Warm Rolling, and Annealing). / Park, Jaeyeong; Song, Hyejin; Kim, Jung Su; Sohn, Seok S; Lee, Sunghak.

In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 48, No. 1, 01.01.2017, p. 57-62.

Research output: Contribution to journalArticle

@article{dc2aad45c45d4c9a969e79acf07aac6e,
title = "Three-Ply Al/Mg/Al Clad Sheets Fabricated by Twin-Roll Casting and Post-treatments (Homogenization, Warm Rolling, and Annealing)",
abstract = "When thin Al alloy sheets are clad on to twin-roll-cast Mg alloy melt, inherent drawbacks of Mg alloys such as poor formability, corrosion resistance, and surface quality can be effectively complemented. In this study, three-ply Al/Mg/Al clad sheets were fabricated by twin-roll casting and post-treatments. Brittle interfacial layers composed of γ (Mg17Al12) and β (Mg2Al3) phases were inevitably formed, but their proper thickening during the post-treatments led to improvement of interfacial bonding and resultant tensile properties. In particular, warm rolling was an effective way to modify interfacial microstructures and tensile properties by minimizing deformation inhomogeneity and stress concentration.",
author = "Jaeyeong Park and Hyejin Song and Kim, {Jung Su} and Sohn, {Seok S} and Sunghak Lee",
year = "2017",
month = "1",
day = "1",
doi = "10.1007/s11661-016-3842-7",
language = "English",
volume = "48",
pages = "57--62",
journal = "Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science",
issn = "1073-5623",
publisher = "Springer Boston",
number = "1",

}

TY - JOUR

T1 - Three-Ply Al/Mg/Al Clad Sheets Fabricated by Twin-Roll Casting and Post-treatments (Homogenization, Warm Rolling, and Annealing)

AU - Park, Jaeyeong

AU - Song, Hyejin

AU - Kim, Jung Su

AU - Sohn, Seok S

AU - Lee, Sunghak

PY - 2017/1/1

Y1 - 2017/1/1

N2 - When thin Al alloy sheets are clad on to twin-roll-cast Mg alloy melt, inherent drawbacks of Mg alloys such as poor formability, corrosion resistance, and surface quality can be effectively complemented. In this study, three-ply Al/Mg/Al clad sheets were fabricated by twin-roll casting and post-treatments. Brittle interfacial layers composed of γ (Mg17Al12) and β (Mg2Al3) phases were inevitably formed, but their proper thickening during the post-treatments led to improvement of interfacial bonding and resultant tensile properties. In particular, warm rolling was an effective way to modify interfacial microstructures and tensile properties by minimizing deformation inhomogeneity and stress concentration.

AB - When thin Al alloy sheets are clad on to twin-roll-cast Mg alloy melt, inherent drawbacks of Mg alloys such as poor formability, corrosion resistance, and surface quality can be effectively complemented. In this study, three-ply Al/Mg/Al clad sheets were fabricated by twin-roll casting and post-treatments. Brittle interfacial layers composed of γ (Mg17Al12) and β (Mg2Al3) phases were inevitably formed, but their proper thickening during the post-treatments led to improvement of interfacial bonding and resultant tensile properties. In particular, warm rolling was an effective way to modify interfacial microstructures and tensile properties by minimizing deformation inhomogeneity and stress concentration.

UR - http://www.scopus.com/inward/record.url?scp=84994158266&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84994158266&partnerID=8YFLogxK

U2 - 10.1007/s11661-016-3842-7

DO - 10.1007/s11661-016-3842-7

M3 - Article

AN - SCOPUS:84994158266

VL - 48

SP - 57

EP - 62

JO - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

JF - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

SN - 1073-5623

IS - 1

ER -