Timescale analysis for estimating upper limit perfusion rate in a microfluidic perfusion cell culture platform

Joon Ho Maeng, Hyo Eun Jeong, Hyun Joon Shin, Sehoon Kim, Jong Chul Lee, Jaeyoung Lee, Seok Chung, Sangyoup Lee

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Proliferation characteristics of CHO-K1 cells were investigated under a variety of medium perfusion rate conditions in a microfluidic perfusion cell culture platform. Five microcavities of $$800\,\upmu \hbox {m}~(w)\,\times \,800\,\upmu \hbox {m}~(l)\,\times \,400\,\upmu \hbox {m}~(h)$$800μm(w)×800μm(l)×400μm(h) were adopted in order to minimize or isolate the shear effects on cell surfaces. Microchannels of $$800\,\upmu \hbox {m}~(w)\,\times \,3.5\,\hbox {mm}~(l)\,\times \,100\,\upmu \hbox {m}~(h)$$800μm(w)×3.5mm(l)×100μm(h) serially connecting these microcavities created flow contractions and expansions repeatedly, resulting in two different diffusion and convection timescales through the platform. Average shear stresses on the bottom of microcavity were both numerically and analytically estimated, and medium flow was operated at rates where shear stress is below $$\sim$$∼2 mPa. Proliferation rates of CHO-K1 cells were investigated based both on population groups derived from the number of initially seeded cells and on the microcavity locations. Population groups showed minimal influences on proliferation rates, while proliferation rates increased clearly with medium perfusion rates. Strong effects of microcavity locations were observed on proliferation at $$\hbox {Pe}\,\ge \,45$$Pe≥45. Such effects were analyzed by investigating the relationships of reaction, diffusion, and convection timescales associated with perfusion conditions. The ratio of diffusion timescale and convection timescale was suggested as a guideline to estimate the upper limit of perfusion rate in microfluidic perfusion cell culture platform.

Original languageEnglish
Pages (from-to)777-786
Number of pages10
JournalMicrofluidics and Nanofluidics
Volume19
Issue number4
DOIs
Publication statusPublished - 2015 Oct 1

Fingerprint

Microcavities
Cell culture
Microfluidics
estimating
platforms
Shear stress
convection
cells
shear stress
Microchannels
microchannels
contraction
Convection
shear
expansion

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry

Cite this

Timescale analysis for estimating upper limit perfusion rate in a microfluidic perfusion cell culture platform. / Maeng, Joon Ho; Jeong, Hyo Eun; Shin, Hyun Joon; Kim, Sehoon; Lee, Jong Chul; Lee, Jaeyoung; Chung, Seok; Lee, Sangyoup.

In: Microfluidics and Nanofluidics, Vol. 19, No. 4, 01.10.2015, p. 777-786.

Research output: Contribution to journalArticle

Maeng, Joon Ho ; Jeong, Hyo Eun ; Shin, Hyun Joon ; Kim, Sehoon ; Lee, Jong Chul ; Lee, Jaeyoung ; Chung, Seok ; Lee, Sangyoup. / Timescale analysis for estimating upper limit perfusion rate in a microfluidic perfusion cell culture platform. In: Microfluidics and Nanofluidics. 2015 ; Vol. 19, No. 4. pp. 777-786.
@article{d08686c242974a4e9dd276572e6afc4f,
title = "Timescale analysis for estimating upper limit perfusion rate in a microfluidic perfusion cell culture platform",
abstract = "Proliferation characteristics of CHO-K1 cells were investigated under a variety of medium perfusion rate conditions in a microfluidic perfusion cell culture platform. Five microcavities of $$800\,\upmu \hbox {m}~(w)\,\times \,800\,\upmu \hbox {m}~(l)\,\times \,400\,\upmu \hbox {m}~(h)$$800μm(w)×800μm(l)×400μm(h) were adopted in order to minimize or isolate the shear effects on cell surfaces. Microchannels of $$800\,\upmu \hbox {m}~(w)\,\times \,3.5\,\hbox {mm}~(l)\,\times \,100\,\upmu \hbox {m}~(h)$$800μm(w)×3.5mm(l)×100μm(h) serially connecting these microcavities created flow contractions and expansions repeatedly, resulting in two different diffusion and convection timescales through the platform. Average shear stresses on the bottom of microcavity were both numerically and analytically estimated, and medium flow was operated at rates where shear stress is below $$\sim$$∼2 mPa. Proliferation rates of CHO-K1 cells were investigated based both on population groups derived from the number of initially seeded cells and on the microcavity locations. Population groups showed minimal influences on proliferation rates, while proliferation rates increased clearly with medium perfusion rates. Strong effects of microcavity locations were observed on proliferation at $$\hbox {Pe}\,\ge \,45$$Pe≥45. Such effects were analyzed by investigating the relationships of reaction, diffusion, and convection timescales associated with perfusion conditions. The ratio of diffusion timescale and convection timescale was suggested as a guideline to estimate the upper limit of perfusion rate in microfluidic perfusion cell culture platform.",
author = "Maeng, {Joon Ho} and Jeong, {Hyo Eun} and Shin, {Hyun Joon} and Sehoon Kim and Lee, {Jong Chul} and Jaeyoung Lee and Seok Chung and Sangyoup Lee",
year = "2015",
month = "10",
day = "1",
doi = "10.1007/s10404-015-1602-4",
language = "English",
volume = "19",
pages = "777--786",
journal = "Microfluidics and Nanofluidics",
issn = "1613-4982",
publisher = "Springer Verlag",
number = "4",

}

TY - JOUR

T1 - Timescale analysis for estimating upper limit perfusion rate in a microfluidic perfusion cell culture platform

AU - Maeng, Joon Ho

AU - Jeong, Hyo Eun

AU - Shin, Hyun Joon

AU - Kim, Sehoon

AU - Lee, Jong Chul

AU - Lee, Jaeyoung

AU - Chung, Seok

AU - Lee, Sangyoup

PY - 2015/10/1

Y1 - 2015/10/1

N2 - Proliferation characteristics of CHO-K1 cells were investigated under a variety of medium perfusion rate conditions in a microfluidic perfusion cell culture platform. Five microcavities of $$800\,\upmu \hbox {m}~(w)\,\times \,800\,\upmu \hbox {m}~(l)\,\times \,400\,\upmu \hbox {m}~(h)$$800μm(w)×800μm(l)×400μm(h) were adopted in order to minimize or isolate the shear effects on cell surfaces. Microchannels of $$800\,\upmu \hbox {m}~(w)\,\times \,3.5\,\hbox {mm}~(l)\,\times \,100\,\upmu \hbox {m}~(h)$$800μm(w)×3.5mm(l)×100μm(h) serially connecting these microcavities created flow contractions and expansions repeatedly, resulting in two different diffusion and convection timescales through the platform. Average shear stresses on the bottom of microcavity were both numerically and analytically estimated, and medium flow was operated at rates where shear stress is below $$\sim$$∼2 mPa. Proliferation rates of CHO-K1 cells were investigated based both on population groups derived from the number of initially seeded cells and on the microcavity locations. Population groups showed minimal influences on proliferation rates, while proliferation rates increased clearly with medium perfusion rates. Strong effects of microcavity locations were observed on proliferation at $$\hbox {Pe}\,\ge \,45$$Pe≥45. Such effects were analyzed by investigating the relationships of reaction, diffusion, and convection timescales associated with perfusion conditions. The ratio of diffusion timescale and convection timescale was suggested as a guideline to estimate the upper limit of perfusion rate in microfluidic perfusion cell culture platform.

AB - Proliferation characteristics of CHO-K1 cells were investigated under a variety of medium perfusion rate conditions in a microfluidic perfusion cell culture platform. Five microcavities of $$800\,\upmu \hbox {m}~(w)\,\times \,800\,\upmu \hbox {m}~(l)\,\times \,400\,\upmu \hbox {m}~(h)$$800μm(w)×800μm(l)×400μm(h) were adopted in order to minimize or isolate the shear effects on cell surfaces. Microchannels of $$800\,\upmu \hbox {m}~(w)\,\times \,3.5\,\hbox {mm}~(l)\,\times \,100\,\upmu \hbox {m}~(h)$$800μm(w)×3.5mm(l)×100μm(h) serially connecting these microcavities created flow contractions and expansions repeatedly, resulting in two different diffusion and convection timescales through the platform. Average shear stresses on the bottom of microcavity were both numerically and analytically estimated, and medium flow was operated at rates where shear stress is below $$\sim$$∼2 mPa. Proliferation rates of CHO-K1 cells were investigated based both on population groups derived from the number of initially seeded cells and on the microcavity locations. Population groups showed minimal influences on proliferation rates, while proliferation rates increased clearly with medium perfusion rates. Strong effects of microcavity locations were observed on proliferation at $$\hbox {Pe}\,\ge \,45$$Pe≥45. Such effects were analyzed by investigating the relationships of reaction, diffusion, and convection timescales associated with perfusion conditions. The ratio of diffusion timescale and convection timescale was suggested as a guideline to estimate the upper limit of perfusion rate in microfluidic perfusion cell culture platform.

UR - http://www.scopus.com/inward/record.url?scp=84942982343&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84942982343&partnerID=8YFLogxK

U2 - 10.1007/s10404-015-1602-4

DO - 10.1007/s10404-015-1602-4

M3 - Article

AN - SCOPUS:84942982343

VL - 19

SP - 777

EP - 786

JO - Microfluidics and Nanofluidics

JF - Microfluidics and Nanofluidics

SN - 1613-4982

IS - 4

ER -