Two-arm cooperative assembly using force-guided control with adaptive accomodation

Jong Dho Choi, Sungchul Kang, Munsang Kim, Chong W. Lee, Jae-Bok Song

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Abstract

In this paper, a new two-arm cooperative assembly (or insertion) algorithm is proposed. As a force-guided control method for the cooperative assembly, the adaptive accommodation controller is adopted since it does not need any complicated contact state analysis nor depends on the geometrical complexity of the assembly parts. Also, the RMRC (resolved motion rate control) method using a relative Jacobian is used to solve inverse kinematics for two manipulators. By using the relative Jacobian, the two cooperative redundant manipulators can be structured as a new single redundant manipulator. The two arms can perform a variety of insertion tasks by a relative motion between their end effectors. A force/torque sensing model, using an approximated penetration depth calculation algorithm is developed and used to compute a contact force/torque in the graphic assembly simulation. By using the adaptive accommodation controller and the force/torque sensing model, a spatial cooperative assembly tasks have been successfully executed in the graphic simulation. Finally, through a cooperative assembly task experiment using a humanoid robot CENTAUR, which inserts a spatially bent pin into a hole, its feasibility and applicability are verified.

Original languageEnglish
Title of host publicationIEEE International Conference on Intelligent Robots and Systems
Place of PublicationPiscataway, NJ, United States
PublisherIEEE
Pages1253-1258
Number of pages6
Volume2
Publication statusPublished - 1999 Dec 1
Externally publishedYes
Event1999 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'99): Human and Environment Friendly Robots whith High Intelligence and Emotional Quotients' - Kyongju, South Korea
Duration: 1999 Oct 171999 Oct 21

Other

Other1999 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'99): Human and Environment Friendly Robots whith High Intelligence and Emotional Quotients'
CityKyongju, South Korea
Period99/10/1799/10/21

Fingerprint

Redundant manipulators
Torque
Controllers
Inverse kinematics
End effectors
Manipulators
Robots
Experiments

ASJC Scopus subject areas

  • Control and Systems Engineering

Cite this

Choi, J. D., Kang, S., Kim, M., Lee, C. W., & Song, J-B. (1999). Two-arm cooperative assembly using force-guided control with adaptive accomodation. In IEEE International Conference on Intelligent Robots and Systems (Vol. 2, pp. 1253-1258). Piscataway, NJ, United States: IEEE.

Two-arm cooperative assembly using force-guided control with adaptive accomodation. / Choi, Jong Dho; Kang, Sungchul; Kim, Munsang; Lee, Chong W.; Song, Jae-Bok.

IEEE International Conference on Intelligent Robots and Systems. Vol. 2 Piscataway, NJ, United States : IEEE, 1999. p. 1253-1258.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Choi, JD, Kang, S, Kim, M, Lee, CW & Song, J-B 1999, Two-arm cooperative assembly using force-guided control with adaptive accomodation. in IEEE International Conference on Intelligent Robots and Systems. vol. 2, IEEE, Piscataway, NJ, United States, pp. 1253-1258, 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'99): Human and Environment Friendly Robots whith High Intelligence and Emotional Quotients', Kyongju, South Korea, 99/10/17.
Choi JD, Kang S, Kim M, Lee CW, Song J-B. Two-arm cooperative assembly using force-guided control with adaptive accomodation. In IEEE International Conference on Intelligent Robots and Systems. Vol. 2. Piscataway, NJ, United States: IEEE. 1999. p. 1253-1258
Choi, Jong Dho ; Kang, Sungchul ; Kim, Munsang ; Lee, Chong W. ; Song, Jae-Bok. / Two-arm cooperative assembly using force-guided control with adaptive accomodation. IEEE International Conference on Intelligent Robots and Systems. Vol. 2 Piscataway, NJ, United States : IEEE, 1999. pp. 1253-1258
@inproceedings{0daa54209d8948ca9d806bf4f844473e,
title = "Two-arm cooperative assembly using force-guided control with adaptive accomodation",
abstract = "In this paper, a new two-arm cooperative assembly (or insertion) algorithm is proposed. As a force-guided control method for the cooperative assembly, the adaptive accommodation controller is adopted since it does not need any complicated contact state analysis nor depends on the geometrical complexity of the assembly parts. Also, the RMRC (resolved motion rate control) method using a relative Jacobian is used to solve inverse kinematics for two manipulators. By using the relative Jacobian, the two cooperative redundant manipulators can be structured as a new single redundant manipulator. The two arms can perform a variety of insertion tasks by a relative motion between their end effectors. A force/torque sensing model, using an approximated penetration depth calculation algorithm is developed and used to compute a contact force/torque in the graphic assembly simulation. By using the adaptive accommodation controller and the force/torque sensing model, a spatial cooperative assembly tasks have been successfully executed in the graphic simulation. Finally, through a cooperative assembly task experiment using a humanoid robot CENTAUR, which inserts a spatially bent pin into a hole, its feasibility and applicability are verified.",
author = "Choi, {Jong Dho} and Sungchul Kang and Munsang Kim and Lee, {Chong W.} and Jae-Bok Song",
year = "1999",
month = "12",
day = "1",
language = "English",
volume = "2",
pages = "1253--1258",
booktitle = "IEEE International Conference on Intelligent Robots and Systems",
publisher = "IEEE",

}

TY - GEN

T1 - Two-arm cooperative assembly using force-guided control with adaptive accomodation

AU - Choi, Jong Dho

AU - Kang, Sungchul

AU - Kim, Munsang

AU - Lee, Chong W.

AU - Song, Jae-Bok

PY - 1999/12/1

Y1 - 1999/12/1

N2 - In this paper, a new two-arm cooperative assembly (or insertion) algorithm is proposed. As a force-guided control method for the cooperative assembly, the adaptive accommodation controller is adopted since it does not need any complicated contact state analysis nor depends on the geometrical complexity of the assembly parts. Also, the RMRC (resolved motion rate control) method using a relative Jacobian is used to solve inverse kinematics for two manipulators. By using the relative Jacobian, the two cooperative redundant manipulators can be structured as a new single redundant manipulator. The two arms can perform a variety of insertion tasks by a relative motion between their end effectors. A force/torque sensing model, using an approximated penetration depth calculation algorithm is developed and used to compute a contact force/torque in the graphic assembly simulation. By using the adaptive accommodation controller and the force/torque sensing model, a spatial cooperative assembly tasks have been successfully executed in the graphic simulation. Finally, through a cooperative assembly task experiment using a humanoid robot CENTAUR, which inserts a spatially bent pin into a hole, its feasibility and applicability are verified.

AB - In this paper, a new two-arm cooperative assembly (or insertion) algorithm is proposed. As a force-guided control method for the cooperative assembly, the adaptive accommodation controller is adopted since it does not need any complicated contact state analysis nor depends on the geometrical complexity of the assembly parts. Also, the RMRC (resolved motion rate control) method using a relative Jacobian is used to solve inverse kinematics for two manipulators. By using the relative Jacobian, the two cooperative redundant manipulators can be structured as a new single redundant manipulator. The two arms can perform a variety of insertion tasks by a relative motion between their end effectors. A force/torque sensing model, using an approximated penetration depth calculation algorithm is developed and used to compute a contact force/torque in the graphic assembly simulation. By using the adaptive accommodation controller and the force/torque sensing model, a spatial cooperative assembly tasks have been successfully executed in the graphic simulation. Finally, through a cooperative assembly task experiment using a humanoid robot CENTAUR, which inserts a spatially bent pin into a hole, its feasibility and applicability are verified.

UR - http://www.scopus.com/inward/record.url?scp=0033331355&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033331355&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0033331355

VL - 2

SP - 1253

EP - 1258

BT - IEEE International Conference on Intelligent Robots and Systems

PB - IEEE

CY - Piscataway, NJ, United States

ER -