Two-dimensional square lattice photonic crystal slab single defect laser

H. Y. Ryu, S. H. Kim, Hong Kyu Park, Y. H. Lee, J. S. Kim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The investigation of a single defect cavity formed in a free-standing square lattice photonic crystal slab was presented. The 3-D finite-difference time-domain method was used to calculate the cavity modes and quality factors of a free-standing square lattice photonic crystal slab single defect. Electron-beam lithography, dry etching and undercut wet etching with HCl solution were used to fabricate the photonic crystal slabs. Four lobes wchich corresponds to the quadrupole mode profile were shown by the mode images observed.

Original languageEnglish
Title of host publicationConference Proceedings - Lasers and Electro-Optics Society Annual Meeting-LEOS
Pages80-81
Number of pages2
Volume1
Publication statusPublished - 2001
Externally publishedYes
Event14th Annual Meeting of the IEEE Lasers and Electro-Optics Society - San Diego, CA, United States
Duration: 2001 Nov 112001 Nov 15

Other

Other14th Annual Meeting of the IEEE Lasers and Electro-Optics Society
CountryUnited States
CitySan Diego, CA
Period01/11/1101/11/15

    Fingerprint

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering

Cite this

Ryu, H. Y., Kim, S. H., Park, H. K., Lee, Y. H., & Kim, J. S. (2001). Two-dimensional square lattice photonic crystal slab single defect laser. In Conference Proceedings - Lasers and Electro-Optics Society Annual Meeting-LEOS (Vol. 1, pp. 80-81)