Ultimate strength of horizontally curved steel I-girders with equal end moments

Keesei Lee, James S. Davidson, Junho Choi, Young Jong Kang

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Even under gravitational loading alone, horizontally curved girders experience not only bending moment but also torsional moment. The torsional moment acting on open sections simultaneously produces shear and normal stress due to pure and warping torsion respectively. Consequently, bending moment, pure torsion and warping torsion are coupled, which results in a very complicated stress state that makes it difficult to calculate the ultimate strength of horizontally curved members. This study revealed that the initial curvature can reduce the ultimate strength of horizontally curved members by up to 50%. Although current design specifications such as the AASHTO LRFD Bridge Design Specifications, suggest some alternatives, the exact behavior of a curved member cannot be considered well with those provisions. While it is true that the one-third rule is convenient to apply and gives good results, there is no strength equation for curved members. In order to derive an adequate strength equation for curved members, this research suggests a new concept of ultimate state. Finite element analysis using ABAQUS is used to consider the effects of sectional rigidities for bending, pure torsion and non-uniform torsion separately. Finally, an ultimate strength equation is suggested for simply supported curved girders that are subjected to equal end moments.

Original languageEnglish
Pages (from-to)17-31
Number of pages15
JournalEngineering Structures
Volume153
DOIs
Publication statusPublished - 2017 Dec 15

Fingerprint

Beams and girders
Torsional stress
Steel
Bending moments
Specifications
Bending (deformation)
ABAQUS
Rigidity
Finite element method

Keywords

  • Finite element analysis
  • Horizontally curved girder
  • Lateral torsional buckling
  • Nonlinear
  • Torsion
  • Ultimate strength

ASJC Scopus subject areas

  • Civil and Structural Engineering

Cite this

Ultimate strength of horizontally curved steel I-girders with equal end moments. / Lee, Keesei; Davidson, James S.; Choi, Junho; Kang, Young Jong.

In: Engineering Structures, Vol. 153, 15.12.2017, p. 17-31.

Research output: Contribution to journalArticle

Lee, Keesei ; Davidson, James S. ; Choi, Junho ; Kang, Young Jong. / Ultimate strength of horizontally curved steel I-girders with equal end moments. In: Engineering Structures. 2017 ; Vol. 153. pp. 17-31.
@article{01f012a6fbf8467e9a46a8f8f8370ef4,
title = "Ultimate strength of horizontally curved steel I-girders with equal end moments",
abstract = "Even under gravitational loading alone, horizontally curved girders experience not only bending moment but also torsional moment. The torsional moment acting on open sections simultaneously produces shear and normal stress due to pure and warping torsion respectively. Consequently, bending moment, pure torsion and warping torsion are coupled, which results in a very complicated stress state that makes it difficult to calculate the ultimate strength of horizontally curved members. This study revealed that the initial curvature can reduce the ultimate strength of horizontally curved members by up to 50{\%}. Although current design specifications such as the AASHTO LRFD Bridge Design Specifications, suggest some alternatives, the exact behavior of a curved member cannot be considered well with those provisions. While it is true that the one-third rule is convenient to apply and gives good results, there is no strength equation for curved members. In order to derive an adequate strength equation for curved members, this research suggests a new concept of ultimate state. Finite element analysis using ABAQUS is used to consider the effects of sectional rigidities for bending, pure torsion and non-uniform torsion separately. Finally, an ultimate strength equation is suggested for simply supported curved girders that are subjected to equal end moments.",
keywords = "Finite element analysis, Horizontally curved girder, Lateral torsional buckling, Nonlinear, Torsion, Ultimate strength",
author = "Keesei Lee and Davidson, {James S.} and Junho Choi and Kang, {Young Jong}",
year = "2017",
month = "12",
day = "15",
doi = "10.1016/j.engstruct.2017.09.047",
language = "English",
volume = "153",
pages = "17--31",
journal = "Engineering Structures",
issn = "0141-0296",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Ultimate strength of horizontally curved steel I-girders with equal end moments

AU - Lee, Keesei

AU - Davidson, James S.

AU - Choi, Junho

AU - Kang, Young Jong

PY - 2017/12/15

Y1 - 2017/12/15

N2 - Even under gravitational loading alone, horizontally curved girders experience not only bending moment but also torsional moment. The torsional moment acting on open sections simultaneously produces shear and normal stress due to pure and warping torsion respectively. Consequently, bending moment, pure torsion and warping torsion are coupled, which results in a very complicated stress state that makes it difficult to calculate the ultimate strength of horizontally curved members. This study revealed that the initial curvature can reduce the ultimate strength of horizontally curved members by up to 50%. Although current design specifications such as the AASHTO LRFD Bridge Design Specifications, suggest some alternatives, the exact behavior of a curved member cannot be considered well with those provisions. While it is true that the one-third rule is convenient to apply and gives good results, there is no strength equation for curved members. In order to derive an adequate strength equation for curved members, this research suggests a new concept of ultimate state. Finite element analysis using ABAQUS is used to consider the effects of sectional rigidities for bending, pure torsion and non-uniform torsion separately. Finally, an ultimate strength equation is suggested for simply supported curved girders that are subjected to equal end moments.

AB - Even under gravitational loading alone, horizontally curved girders experience not only bending moment but also torsional moment. The torsional moment acting on open sections simultaneously produces shear and normal stress due to pure and warping torsion respectively. Consequently, bending moment, pure torsion and warping torsion are coupled, which results in a very complicated stress state that makes it difficult to calculate the ultimate strength of horizontally curved members. This study revealed that the initial curvature can reduce the ultimate strength of horizontally curved members by up to 50%. Although current design specifications such as the AASHTO LRFD Bridge Design Specifications, suggest some alternatives, the exact behavior of a curved member cannot be considered well with those provisions. While it is true that the one-third rule is convenient to apply and gives good results, there is no strength equation for curved members. In order to derive an adequate strength equation for curved members, this research suggests a new concept of ultimate state. Finite element analysis using ABAQUS is used to consider the effects of sectional rigidities for bending, pure torsion and non-uniform torsion separately. Finally, an ultimate strength equation is suggested for simply supported curved girders that are subjected to equal end moments.

KW - Finite element analysis

KW - Horizontally curved girder

KW - Lateral torsional buckling

KW - Nonlinear

KW - Torsion

KW - Ultimate strength

UR - http://www.scopus.com/inward/record.url?scp=85033588816&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85033588816&partnerID=8YFLogxK

U2 - 10.1016/j.engstruct.2017.09.047

DO - 10.1016/j.engstruct.2017.09.047

M3 - Article

AN - SCOPUS:85033588816

VL - 153

SP - 17

EP - 31

JO - Engineering Structures

JF - Engineering Structures

SN - 0141-0296

ER -