Valorisation of steelmaking slag by microwave treatment

Y. B. Kang, T. Kim, J. Lee

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

In order to optimise the recovery process of Fe and P from industrial steelmaking slag by microwave irradiation, the recovery ratios of Fe and P fromslag-graphite mixtures were investigated. In the reduction of industrial slag by graphite at a fixed microwave processing time of 900 s using amicrowave oven, the recovery ratio of Fe increased with increasing carbon equivalent (C eq.: the mole ratio of carbon/oxygen to reduce Fe 2O 3 and FeO, yieldingCOgas) and reached 0.87 whenC eq.51.56. The recovery ratio of P also increased with C eq. and showed 0.93 at the same condition. From the comparison between the present and previous studies by Kim and Lee employing a synthetic slag, it was found that almost similar results were obtained. From the chemical analysis of the slag and metal after experiments, it was found that the phosphorus distribution ratio (L p) strongly depended on the total Fe content in the slag, namely, as the FeO content decreased, the L p value decreased. Discrepancies observed between the present and previous studies are discussed in view of microwave power and thermodynamic analysis.

Original languageEnglish
Pages (from-to)498-503
Number of pages6
JournalIronmaking and Steelmaking
Volume39
Issue number7
DOIs
Publication statusPublished - 2012 Oct

Keywords

  • Microwave irradiation
  • Recovery iron and phosphorus
  • Steelmaking slag

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Valorisation of steelmaking slag by microwave treatment'. Together they form a unique fingerprint.

  • Cite this