Vertical Split Ring Resonator Using Vias with Wide Bandwidth and Small Electrical Size

Jongwon Choi; Sangyeol Oh; Sangjin Jo; Won Sang Yoon; Jaehoon Lee

doi:10.1109/LMWC.2016.2629988

Vertical Split Ring Resonator Using Vias with Wide Bandwidth and Small Electrical Size

Jongwon Choi, Sangyeol Oh, Sangjin Jo, Won Sang Yoon, Jaehoon Lee

Department of Computer Science and Engineering

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Abstract

In this letter, we propose a vertically inserted split ring resonator (SRR) in microstrip lines. Since the top and bottom layers of the resonator are electrically connected by using via holes and it has a 3-D shape, it occupies a small electrical size. Through numerical simulations and measurement, it is shown that it can provide a wider range variation of bandwidth than conventional planar SRRs and the resonant frequency and the bandwidth can be adjusted by its length and width, respectively.

Original language	English
Article number	7779097
Pages (from-to)	16-18
Number of pages	3
Journal	IEEE Microwave and Wireless Components Letters
Volume	27
Issue number	1
DOIs	https://doi.org/10.1109/LMWC.2016.2629988
Publication status	Published - 2017 Jan

Keywords

Electrical size reduction
loaded bandwidth
metamaterials
vertical split ring resonator (VSRR)

ASJC Scopus subject areas

Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/LMWC.2016.2629988

Cite this

@article{a434d50370e94f3580c15f4af664658f,

title = "Vertical Split Ring Resonator Using Vias with Wide Bandwidth and Small Electrical Size",

abstract = "In this letter, we propose a vertically inserted split ring resonator (SRR) in microstrip lines. Since the top and bottom layers of the resonator are electrically connected by using via holes and it has a 3-D shape, it occupies a small electrical size. Through numerical simulations and measurement, it is shown that it can provide a wider range variation of bandwidth than conventional planar SRRs and the resonant frequency and the bandwidth can be adjusted by its length and width, respectively.",

keywords = "Electrical size reduction, loaded bandwidth, metamaterials, vertical split ring resonator (VSRR)",

author = "Jongwon Choi and Sangyeol Oh and Sangjin Jo and Yoon, {Won Sang} and Jaehoon Lee",

note = "Funding Information: This work was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF), funded by the Ministry of Education, Science, and Technology, Republic of Korea (NRF-2015R1A2A2A01005676). Publisher Copyright: {\textcopyright} 2001-2012 IEEE.",

year = "2017",

month = jan,

doi = "10.1109/LMWC.2016.2629988",

language = "English",

volume = "27",

pages = "16--18",

journal = "IEEE Microwave and Wireless Components Letters",

issn = "1531-1309",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "1",

}

TY - JOUR

T1 - Vertical Split Ring Resonator Using Vias with Wide Bandwidth and Small Electrical Size

AU - Choi, Jongwon

AU - Oh, Sangyeol

AU - Jo, Sangjin

AU - Yoon, Won Sang

AU - Lee, Jaehoon

N1 - Funding Information: This work was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF), funded by the Ministry of Education, Science, and Technology, Republic of Korea (NRF-2015R1A2A2A01005676). Publisher Copyright: © 2001-2012 IEEE.

PY - 2017/1

Y1 - 2017/1

N2 - In this letter, we propose a vertically inserted split ring resonator (SRR) in microstrip lines. Since the top and bottom layers of the resonator are electrically connected by using via holes and it has a 3-D shape, it occupies a small electrical size. Through numerical simulations and measurement, it is shown that it can provide a wider range variation of bandwidth than conventional planar SRRs and the resonant frequency and the bandwidth can be adjusted by its length and width, respectively.

AB - In this letter, we propose a vertically inserted split ring resonator (SRR) in microstrip lines. Since the top and bottom layers of the resonator are electrically connected by using via holes and it has a 3-D shape, it occupies a small electrical size. Through numerical simulations and measurement, it is shown that it can provide a wider range variation of bandwidth than conventional planar SRRs and the resonant frequency and the bandwidth can be adjusted by its length and width, respectively.

KW - Electrical size reduction

KW - loaded bandwidth

KW - metamaterials

KW - vertical split ring resonator (VSRR)

UR - http://www.scopus.com/inward/record.url?scp=85003721875&partnerID=8YFLogxK

U2 - 10.1109/LMWC.2016.2629988

DO - 10.1109/LMWC.2016.2629988

M3 - Article

AN - SCOPUS:85003721875

SN - 1531-1309

VL - 27

SP - 16

EP - 18

JO - IEEE Microwave and Wireless Components Letters

JF - IEEE Microwave and Wireless Components Letters

IS - 1

M1 - 7779097

ER -

Vertical Split Ring Resonator Using Vias with Wide Bandwidth and Small Electrical Size

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this