Wetting characteristics of liquid Fe-19%Cr-10%Ni alloys on dense alumina substrates

Minsoo Shin, Joonho Lee, Joo Hyun Park

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Using the sessile drop technique, the contact angle between a liquid Fe-19%Cr-10%Ni drop and adense alumina substrate was measured under H 2 as well as CO2-H2 atmospheres in the temperature range of 1 753 to 1 823 K. The measurements were carried out both in the static mode and the dynamic mode. The static measurements in hydrogen showed that the contact angle decreased from 135 to 107° by increasing temperature from 1 753 to 1 823 K. In the dynamic mode, gas mixtures of different oxygen partial pressures were imposed on the system. At 1 753 K, the contact angle was decreased under the condition of oxide formation, whereas the contact angle was not changed under the condition of no oxide formation. At 1 823 K, the contact angle did not change regardless of the oxide formation. The time required for the surface oxide layer to fully cover the liquid metal drop was decreased by increasing the temperature.

Original languageEnglish
Pages (from-to)1665-1669
Number of pages5
JournalISIJ International
Volume48
Issue number12
DOIs
Publication statusPublished - 2008 Dec 1

Fingerprint

Aluminum Oxide
Contact angle
Wetting
Alumina
Oxides
Liquids
Substrates
Liquid metals
Gas mixtures
Partial pressure
Temperature
Hydrogen
Oxygen

Keywords

  • Alumina
  • Fe-19%Cr-10%Ni alloy
  • Oxide formation
  • Sessile drop method
  • Skull
  • Wetting

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Chemistry
  • Metals and Alloys

Cite this

Wetting characteristics of liquid Fe-19%Cr-10%Ni alloys on dense alumina substrates. / Shin, Minsoo; Lee, Joonho; Park, Joo Hyun.

In: ISIJ International, Vol. 48, No. 12, 01.12.2008, p. 1665-1669.

Research output: Contribution to journalArticle

Shin, Minsoo ; Lee, Joonho ; Park, Joo Hyun. / Wetting characteristics of liquid Fe-19%Cr-10%Ni alloys on dense alumina substrates. In: ISIJ International. 2008 ; Vol. 48, No. 12. pp. 1665-1669.
@article{a09168d0554a4633af3726d64d207965,
title = "Wetting characteristics of liquid Fe-19{\%}Cr-10{\%}Ni alloys on dense alumina substrates",
abstract = "Using the sessile drop technique, the contact angle between a liquid Fe-19{\%}Cr-10{\%}Ni drop and adense alumina substrate was measured under H 2 as well as CO2-H2 atmospheres in the temperature range of 1 753 to 1 823 K. The measurements were carried out both in the static mode and the dynamic mode. The static measurements in hydrogen showed that the contact angle decreased from 135 to 107° by increasing temperature from 1 753 to 1 823 K. In the dynamic mode, gas mixtures of different oxygen partial pressures were imposed on the system. At 1 753 K, the contact angle was decreased under the condition of oxide formation, whereas the contact angle was not changed under the condition of no oxide formation. At 1 823 K, the contact angle did not change regardless of the oxide formation. The time required for the surface oxide layer to fully cover the liquid metal drop was decreased by increasing the temperature.",
keywords = "Alumina, Fe-19{\%}Cr-10{\%}Ni alloy, Oxide formation, Sessile drop method, Skull, Wetting",
author = "Minsoo Shin and Joonho Lee and Park, {Joo Hyun}",
year = "2008",
month = "12",
day = "1",
doi = "10.2355/isijinternational.48.1665",
language = "English",
volume = "48",
pages = "1665--1669",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "12",

}

TY - JOUR

T1 - Wetting characteristics of liquid Fe-19%Cr-10%Ni alloys on dense alumina substrates

AU - Shin, Minsoo

AU - Lee, Joonho

AU - Park, Joo Hyun

PY - 2008/12/1

Y1 - 2008/12/1

N2 - Using the sessile drop technique, the contact angle between a liquid Fe-19%Cr-10%Ni drop and adense alumina substrate was measured under H 2 as well as CO2-H2 atmospheres in the temperature range of 1 753 to 1 823 K. The measurements were carried out both in the static mode and the dynamic mode. The static measurements in hydrogen showed that the contact angle decreased from 135 to 107° by increasing temperature from 1 753 to 1 823 K. In the dynamic mode, gas mixtures of different oxygen partial pressures were imposed on the system. At 1 753 K, the contact angle was decreased under the condition of oxide formation, whereas the contact angle was not changed under the condition of no oxide formation. At 1 823 K, the contact angle did not change regardless of the oxide formation. The time required for the surface oxide layer to fully cover the liquid metal drop was decreased by increasing the temperature.

AB - Using the sessile drop technique, the contact angle between a liquid Fe-19%Cr-10%Ni drop and adense alumina substrate was measured under H 2 as well as CO2-H2 atmospheres in the temperature range of 1 753 to 1 823 K. The measurements were carried out both in the static mode and the dynamic mode. The static measurements in hydrogen showed that the contact angle decreased from 135 to 107° by increasing temperature from 1 753 to 1 823 K. In the dynamic mode, gas mixtures of different oxygen partial pressures were imposed on the system. At 1 753 K, the contact angle was decreased under the condition of oxide formation, whereas the contact angle was not changed under the condition of no oxide formation. At 1 823 K, the contact angle did not change regardless of the oxide formation. The time required for the surface oxide layer to fully cover the liquid metal drop was decreased by increasing the temperature.

KW - Alumina

KW - Fe-19%Cr-10%Ni alloy

KW - Oxide formation

KW - Sessile drop method

KW - Skull

KW - Wetting

UR - http://www.scopus.com/inward/record.url?scp=60649093077&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=60649093077&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.48.1665

DO - 10.2355/isijinternational.48.1665

M3 - Article

AN - SCOPUS:60649093077

VL - 48

SP - 1665

EP - 1669

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 12

ER -